Single Branch Fiber Bundle
Single branch fiber bundles are popular for their broadband ultraviolet (UV) to near-infrared (NIR) transmittance and high throughput. With the right fiber bundle focusing lens assembly, convenient coupling to an Optecali LED light source allows the output light of LED to be focused onto a smaller irradiation area.
Optecali’s line of high-quality fiber optical bundles consists of either 7 or 19 high-grade optical fibers in a round configuration combined in an SMA905 connector. Versions are available with either low-OH or high-OH fibers. Fibers with Ø200 μm cores are used in the bundles of 19 fibers and feature a Ø1.3 mm bundle aperture. In contrast, fibers with Ø550 μm cores are used in the bundles of 7 fibers and feature a Ø2.0 mm bundle aperture. The Ø1.3 mm fiber bundle has a smaller bend radius than the Ø2.0 mm bundle. However, the Ø2.0 mm bundle has a larger diameter allowing more light to travel along it. These fiber bundles are primarily designed for coupling to light sources and therefore the fibers are not in the same orientation at each end, and each item may have some variation in the relative position of the fibers in the connector. For increased durability, these cables incorporate stainless steel protective tubing.
Each patch cable includes two protective caps that shield the connector ends from dust and other hazards.
Custom fiber bundles are available upon request. We can also make custom bifurcated fiber bundles, where one common connector is split into two or more connectors. Please contact.
Optecali’s line of high-quality fiber optical bundles consists of either 7 or 19 high-grade optical fibers in a round configuration combined in an SMA905 connector. Versions are available with either low-OH or high-OH fibers. Fibers with Ø200 μm cores are used in the bundles of 19 fibers and feature a Ø1.3 mm bundle aperture. In contrast, fibers with Ø550 μm cores are used in the bundles of 7 fibers and feature a Ø2.0 mm bundle aperture. The Ø1.3 mm fiber bundle has a smaller bend radius than the Ø2.0 mm bundle. However, the Ø2.0 mm bundle has a larger diameter allowing more light to travel along it. These fiber bundles are primarily designed for coupling to light sources and therefore the fibers are not in the same orientation at each end, and each item may have some variation in the relative position of the fibers in the connector. For increased durability, these cables incorporate stainless steel protective tubing.
Each patch cable includes two protective caps that shield the connector ends from dust and other hazards.
Custom fiber bundles are available upon request. We can also make custom bifurcated fiber bundles, where one common connector is split into two or more connectors. Please contact.
- Broad transmittance range over UV to NIR wavelengths
- High throughput
- Three different glass type fiber bundles offered